Ryan Lode

Past Producer in Alaska, United States with commodities Gold, Antimony
Sections on this page
  1. Identification information
  2. Geographic coordinates
  3. Site location context
  4. Geographic areas
  5. Commodities
  6. Materials information
  7. Alteration
  8. Nearby scientific data
  9. Economic information about the deposit and operations
  10. Mining district
  11. Links to other databases
  12. Bibliographic references
  13. General comments
  14. Reporter information

Geologic information

Identification information

Deposit ID 10308828
MRDS ID A015279
Record type Site
Current site name Ryan Lode
Related records 10002808, 10185318

Geographic coordinates

Geographic coordinates: -147.99295, 64.86266 (WGS84)
Relative position The Ryan mine is on the ridge between Eva Creek and Saint Patrick Creek, on the southeast side of Ester Dome. The mine workings are marked on the Fairbanks D-2 topographic map in the NW1/4NE1/4 sec. 5, T. 1 S., R. 2 W. The property can be reached from the Parks Highway by turning east on Gold Hill Road for about a quarter of a mile, then north and then west on Saint Patrick Road for about 2 miles. The extensive workings can be seen on both sides of the road. The mine is included in locality 18 of Cobb (1972 [MF 410]).

Site location context

Political divisions (FIPS codes)

Fairbanks North Star(Borough)

Alaska(state)

United States(country)

North America(continent)

Land(continent)

USGS map quadrangles

Fairbanks D-2(quadrangle 1:63,360 scale)

Big Delta NW(quadrangle 1:100,000 scale)

Fairbanks(quadrangle 1:250,000 scale)

Hydrologic units (watersheds)

Alaska(hydrologic region)

Geographic areas

Country State
United States Alaska

Commodities

Commodity Importance
Gold Primary
Antimony Critical Secondary

Materials information

Materials Type of material
Arsenopyrite Ore
Gold Ore
Jamesonite Ore
Stibnite Ore

Alteration

  • A surface oxidation zone is present at both the Ryan and Curlew shears and varies in depth from 150 feet to more than 300 feet. There has been extensive sericitic alteration along shears and fractures within the quartz monzonite intrusion. At least three alteration assemblages have been identified: quartz-muscovite-siderite, quartz-muscovite-chlorite, and silicification (Ryan Lode Mines, Inc., unpublished report, 1996).

Nearby scientific data

(1) -147.99295, 64.86266

Economic information

Comments on the geologic information

  • Geologic Description = The following is a summary of the Ryan Lode property prepared Ryan Lode Mines, Inc. (Ryan Lode Mines, Inc., unpublished report, 1996). The Ryan lode is underlain by the Fairbanks Schist that consists of quartz-mica schist, mica schist, and calcareous schist. A small quartz monzonite intrusion is located in the southeast portion of the property. Prior to the intrusion, the rocks underwent several episodes of regional deformation. Post-intrusive brittle deformation resulted in pervasive near-vertical faulting. The dominant structural trend on the property parallels the regional trend of about N. 45 E. The ore reserves occur in two shear zones: the Ryan shear and the Curlew shear, which is just south of the Ryan shear. Both deposits are shist-hosted and structurally controlled. However, the Curlew shear is partially in a small quartz monzonite intrusion. A surface oxidation zone is present at both sites and varies in depth from 150 feet to more than 300 feet. Quartz veins in the shear zones contain gold, arsenopyrite, and minor pyrite and stibnite. The Ryan shear is of varied thickness and has an average strike of N. 30 E. Where the the shear zone trends N. 35 E. to N. 55 E., secondary splays diverge from the main trunk at regular intervals along the shear. The dip of the Ryan shear varies between 50 and 80 degrees east. High-grade ore is found in pods which form at deflection points in the shear zone. As in the Ryan shear, the gold and sulfides in the Curlew shear are associated with quartz-filled voids in highly fractured rock. The intrusion (90 to 93 m.y. old) that hosts part of the Curlew shear appears to be sill-like, and in some places it is in fault contact with the surrounding schist. It has a core of quartz monzonite surrounded by a border of granodiorite to quartz diorite. There has been extensive sericitic alteration along shears and fractures within the intrusion. At least three alteration assemblages have been identified: quartz-muscovite-siderite, quartz-muscovite-chlorite, and silicification. White mica in the hydrothermal stockwork has been dated at 89.1 +/- 0.3 Ma (McCoy and others, 1997). Gold ore was discovered at the Ryan lode in the early 1900's; the first production was recorded in 1911(Brooks, 1912, p. 33). Work continued intermittently from 1911 to 1958. The gold varies from 814 to 834 fine (Glover, 1950). Between 1938 and 1942, more than 1,500 feet of shafts, 2,000 feet of drifts, adits and crosscuts, and more than 2,800 feet of trenching was completed (Warfield and Thomas, 1972). From 1987 to 1989, approximately 320,000 tons of ore were mined from an open pit (R. Hughes, written commun., 1996). In recent years, sampling of the Ryan and Curlew ore bodies has been accomplished by both reverse circulation and core drilling that began in 1990 and continued until 1993 (Ryan Lode Mines, Inc., unpublished report, 1996). From this drilling, a reserve of 8.27 million tons of material grading 0.077 ounce of gold per ton has been defined (Masterman and Campbell, 1993).
  • Age = McCoy and others (1997) dated both hydrothermal and intrusion-related minerals using the 40Ar/39Ar method. At the Ryan lode, hydrothermal white mica has been dated at 89.1 +/- 0.3 Ma, and white mica from hydrothermally altered schist has been dated at 87.6 +/- 0.3 Ma. The quartz diorite hornblende was dated at 90.6 +/- 0.3 Ma, and the quartz diorite biotite was dated at 90.2 +/- 0.3 Ma; both are cut by mineralized shear zones and thus are earlier than the mineralization.

Economic information about the deposit and operations

Development status Past Producer
Commodity type Metallic

Comments on exploration

  • Status = Inactive

Mining district

District name Fairbanks

Comments on the production information

  • Production Notes = The first shipment of ore was reported in 1911 (Brooks, 1912, p. 33). In 1938, Bartholomae Oil Co. cleaned out the old shaft and ore was taken out and milled (Smith, 1939 [B 917-A, p. 26]). There is no further production until the late 1980's when La Teko Resources mined approximately 320,000 tons of ore from a pit on the property from 1987 to 1989. This ore contained 19,220 ounces of gold and 14,330 ounces of silver (R. Hughes, written commun., 1996).

Comments on the reserve resource information

  • Reserves = Based on a 0.015-ounce-per-ton cutoff grade, the total reserves in the Ryan Lode and the Curlew Shear are 822,200 ounces of gold in 14.6 million tons of rock. There is a total geologic resource of about 2.4 million ounces of gold (Swainbank and Szumigala, 2000, p. 4).

Comments on the workings information

  • Workings / Exploration = Work was reported on the property as early as 1911(Brooks, 1912, p. 33). In 1913, a shaft was reported to be 90 feet deep (Smith, 1913 [B 525, p. 207]). By 1931, the workings consisted of shallow shafts and pits, a tunnel 300 feet long, and a shaft 200 feet deep (Hill, 1933, p. 135-138). In 1938, Bartholomae Oil Co. had control of the property and cleaned out the old shaft to a depth of 160 feet and drove 330 feet of drift and several hundred feet of crosscuts and raises (Smith, 1939 [B 917-A, p. 26]). In 1940, a large amount of development work was reported including trenching and geophysical work (Smith, 1942, p. 23). Between 1938 and 1942, more than 1,500 feet of shafts, 2,000 feet of drifts, adits and crosscuts, and more than 2,800 feet of trenching was completed (Warfield and Thomas, 1972). From 1954 to 1958, there was minor trenching and drlling (Warfield and Thomas, 1972). In 1969-70, the U.S. Bureau of Mines conducted a drilling program that was a pilot study to compare the cost and environmental damage of rotary drilling versus bulldozer trenching (Warfield and Thomas, 1972). Citigold Mining Company Ltd. acquired the project in 1985 and began a test heap leach, which was unsuccessful (Ryan Lode Mines, unpublished report, 1996). In 1986, La Teko Resources merged with Citigold, and a small, more successful heap leach test was conducted. Full scale production began in 1987. From 1987 to 1989, approximately 320,000 tons of ore were mined from the property by open pit methods (Rich Hughes, written commun., 1996). In recent years, sampling of the Ryan and Curlew ore bodies has been accomplished by both reverse circulation and core drilling, which began in 1990 and continued until 1993 (Ryan Lode Mines, Inc., unpublished report, 1996). In 1993, Citigold Alaska, Inc. was renamed Ryan Lode Mines, Inc. Exploration activity was suspended at the project at the end of 1993, although heap reclamation and detoxification efforts continue at the project site (Ryan Lode Mines, Inc., unpublished report, 1996). In 1997, over 8,000 feet of reverse-circulation holes were drilled on the Ryan Lode (Swainbank and Clautice, 1998, p. 8). In 1999, the property was acquired by Kinross Gold Corporation. The deposit is currently idle while geology and development teams evaluate recent drilling and metallurgical studies (Kinross Gold Corporation web site, 2001, http://www.kinross.com/op/expdev/ala.htm)

Reference information

Bibliographic references

Comments on the references

  • Primary Reference = Ryan Lode Mines, Inc., unpublished report, 1996

General comments

Subject category Comment text
Deposit Model Name = Schist-hosted gold-quartz vein

Reporter information

Type Date Name Affiliation Comment
Reporter 31-JUL-2001 J.R. Guidetti Schaefer and C.J. Freeman Avalon Development Corporation

Beyond USGS

Supplemental information added by qvyshift.com. Not part of the original USGS MRDS record.

Current status (per MSHA)

StatusAbandoned since 08/26/2002
MSHA mine ID5001492
Mine name (MSHA)Ryan Lode Mine
Current operatorFairbanks Gold Mining Inc
Current controller (parent)Kinross Gold Corp
Mine typeSurface (Metal / non-metal)

Inferred by coordinate + name similarity (283 m, 1.00 match). Confirm against MSHA if precision matters — non-USGS-curated cross-references may occasionally point at a neighbouring mine.

Open MSHA's Mine Data Retrieval System for inspections, accidents, and violations for this mine.

Authoritative Alaska resources

These are landing pages for further research — the state agencies don't currently expose per-mine deep links.