Rexall

Past Producer in Alaska, United States with commodity Gold
Sections on this page
  1. Identification information
  2. Geographic coordinates
  3. Site location context
  4. Geographic areas
  5. Commodities
  6. Materials information
  7. Nearby scientific data
  8. Economic information about the deposit and operations
  9. Mining district
  10. Links to other databases
  11. Bibliographic references
  12. General comments
  13. Reporter information

Geologic information

Identification information

Deposit ID 10101023
MRDS ID A015448
Record type Site
Current site name Rexall

Geographic coordinates

Geographic coordinates: -147.36796, 65.07274 (WGS84)
Relative position The Rexall mine is located approximately 200 feet north of the Nordale adit of the Homestake mine on the east side of upper Wolf Creek; NW1/4SW1/4 sec. 21, T. 3 N., R. 2 E., of the Fairbanks Meridian.

Site location context

Political divisions (FIPS codes)

Fairbanks North Star(Borough)

Alaska(state)

United States(country)

North America(continent)

Land(continent)

USGS map quadrangles

Livengood A-1(quadrangle 1:63,360 scale)

Circle SW(quadrangle 1:100,000 scale)

Livengood(quadrangle 1:250,000 scale)

Hydrologic units (watersheds)

Alaska(hydrologic region)

Federal lands

BLM(Federal land areas administered by BLM)

Geographic areas

Country State
United States Alaska

Commodities

Commodity Importance
Gold Primary

Materials information

Materials Type of material
Gold Ore

Nearby scientific data

(1) -147.36796, 65.07274

Economic information

Comments on the geologic information

  • Geologic Description = Gold is found in quartz-rich shear zones. Mining initially began on a 3- to 5-foot wide shear zone trending N 25 E, 25 NW (Smith, 1913; B 525). Samples collected from the Rexall mine in 1910 averaged 6 ounces of gold per ton. By 1911, an adit had been driven 127 feet and 50 feet of drift had been driven on a quartz-rich shear zone that varied from 8 to 32 inches wide (Brooks, 1912). A richer ore shoot was intersected about 140 feet from the portal of the Rexall adit. This zone contained a 1- to 8-inch-wide quartz-rich shear that trends east-west and dips 60 N. The smaller shear is offset a few feet by the larger shear (Smith, 1913; B 525).? By November, 1912, a total of 340 feet of drift had been driven on the smaller shear and two winzes and five production stopes were ready for mining. The smaller shear zone was intersected in the main Rexall adit approximately 140 feet below the surface. Several custom lots of Rexall ore were milled in Fairbanks during 1912. A 25 ton lot from the small shear averaged $112 per ton in free gold (5.4 ounces of gold per ton); a 10 ton lot from the small shear averaged $166 of gold per ton in free gold (8.0 ounces of gold per ton) and a 3 ton lot from the large shear averaged $37 of gold per ton, or 1.8 ounces of gold per ton (Smith, 1913; B 525).

Economic information about the deposit and operations

Development status Past Producer
Commodity type Metallic

Comments on exploration

  • Status = Inactive

Mining district

District name Fairbanks

Comments on the production information

  • Production Notes = Over the winter of 1911-1912, approximately 25-tons of ore were custom milled; they averaged $120 per ton or about 5.8 ounces per ton gold (Times Publishing Company, 1912). Several custom lots of Rexall mine ore were milled in Fairbanks during 1912. A 25 ton lot from the small shear averaged $112 per ton in free gold (5.4 ounces per ton gold), a 10 ton lot from the small shear averaged $166 per ton in free gold (8.0 ounces per ton gold) and a 3 ton lot from the large shear averaged $37 per ton in free gold, or about 1.8 ounces of gold per ton (Smith, 1913; B 525). In the fall of 1912, a two-stamp Joshua Hendy mill was erected on the Rexall claim and began milling ore on November 28, 1912. By this time the Rexall adit was 485 feet long and six stopes were ready for production (Times Publishing Company, 1912). No references to the Rexall mine are available for the period 1913 through 1921. By 1922, Davis (1922) and Stewart (1922) reported that the Rexall mill had been sold to the owners of the David mine and moved to Skoogy Gulch.

Comments on the workings information

  • Workings / Exploration = The Rexall mine was discovered by J.L. Solomon in March, 1910, and shortly afterwards, he staked four claims on the property (Times Publishing Company, 1912). Mining was started on a 3- to 5-foot-wide shear zone oriented N 25 E, 25 NW (Smith, 1913; B 525). By the end of 1911, an adit had been driven 127 feet, and 50 feet of drift cut on a quartz-rich shear zone that varied from 8 to 32 inches wide (Brooks, 1912). By mid-1912, a richer ore shoot was intersected about 140 feet from the portal of the Rexall adit. Work on the larger, northeast-trending shear was abandoned and a winze was sunk to the water table on the smaller, east-west trending shear. A total of 340 feet of drift had been driven on the smaller shear; two winzes and five production stopes were ready for mining by November, 1912. The smaller shear zone was intersected in the main Rexall adit approximately 140 feet below the surface.? In the fall of 1912, a two-stamp Joshua Hendy mill was erected on the Rexall claim and began milling ore in November, 1912. By this time the Rexall adit was 485 feet long and six stopes were ready for mining (Times Publishing Company, 1912).

Reference information

Bibliographic references

Comments on the references

  • Primary Reference = Smith, 1913 (B 525)

General comments

Subject category Comment text
Deposit Model Name = Gold-quartz vein.

Reporter information

Type Date Name Affiliation Comment
Reporter 04-MAY-1999 C.J. Freeman Avalon Development Corporation
Reporter 04-MAY-1999 J.R. Guidetti Schaefer Avalon Development Corporation

Beyond USGS

Supplemental information added by qvyshift.com. Not part of the original USGS MRDS record.

Authoritative Alaska resources

These are landing pages for further research — the state agencies don't currently expose per-mine deep links.