Ione Clays

Past Producer in Amador county in California, United States with commodities Aluminum, Iron, Silica, Water, Free
Sections on this page
  1. Identification information
  2. Geographic coordinates
  3. Site location context
  4. Geographic areas
  5. Public Land Survey System information
  6. Commodities
  7. Materials information
  8. Nearby scientific data
  9. Ore body information
  10. Economic information about the deposit and operations
  11. Mining district
  12. Mineral rights holdings
  13. Land status
  14. Ownership information
  15. Reserves and resources
  16. Workings at the site
  17. Links to other databases
  18. Bibliographic references
  19. General comments
  20. Reporter information

Geologic information

Identification information

Deposit ID 10284070
MAS/MILS ID 0060050024
Record type Site
Current site name Ione Clays
Alternate or previous names Ione-Carbondale Clays

Geographic coordinates

Point of reference Trench
Geographic coordinates: -120.98462, 38.3785 (WGS84)
Elevation 90
Location accuracy 100(meters)

Site location context

Political divisions (FIPS codes)

Amador(county)

California(state)

United States(country)

North America(continent)

Land(continent)

USGS map quadrangles

Irish Hill(quadrangle 1:24,000 scale)

San Andreas(quadrangle 1:100,000 scale)

Sacramento(quadrangle 1:250,000 scale)

Hydrologic units (watersheds)

San Joaquin(hydrologic accounting unit)

San Joaquin(hydrologic subregion)

California(hydrologic region)

Geographic areas

Country State County
United States California Amador

Public Land Survey System information

Meridian Township Range Section Fraction State
Mount Diablo 006 N 009 E 15 NW California

Commodities

Commodity Importance
Aluminum Critical Tertiary
Iron Tertiary
Silica Tertiary
Water, Free Tertiary

Materials information

Materials Type of material
Kaolinite Unknown
Quartz Unknown

Nearby scientific data

Trench (1) -120.98462, 38.3785

Economic information

Ore body information

  • Thickness 30M
    Length 2377M
    Width 731M
    Area 342HA
    Depth to top 3.6M
    Field Value
    Type of Orebody #1 SEDIMENTARY
    Shape of Orebody #1 TABULAR
    Primary mode of Origin SEDIMENTATION
    Secondary mode of Origin RESIDUAL CONCENT
    Primary Ore Control LITHOLOGY
    Degree of Wallrock Alter. NONE
    Type of Wallrock Alter. #1 OTHER
    Strike And Dip N20W:
    Avg. Thick. Unconsol. Mat. 3.6
    Total Surface Area (HA) 342
    Date of Last Modification 830316

Economic information about the deposit and operations

Operation type Surface
Development status Past Producer
Commodity type Metallic
Significant No

Mining district

District name Ione

Mineral rights holdings

Type of mineral rights Fee Ownership
Type of mineral rights Private Lease
Type of mineral rights Minerals Only

Land status

Ownership category Mixed

Ownership information

  • Type Owner
    Owner California Mineral Products Co.
    Home office California
    Year 1943
  • Type Owner
    Owner Yosemite Portland Cement Co.
    Home office California
    Year 1943
  • Type Owner
    Owner Smith V. Parker
    Home office California
    Year 1943
  • Type Owner
    Owner Mrs. Emma Maxwell
    Home office California
    Year 1943
  • Type Owner
    Owner Pacific Portland Cement Co.
    Home office California
    Year 1943

Reserves and resources

  • Type In-situ
    Estimate year 1943
    Measured 35240000mt ore
    Indicated 13572000mt ore
    Demonstrated 48812000mt ore
    Total resources 48812000mt ore
    Commodity Subtype Grade units Group Importance Year
    Aluminum Al2O3 23.6999 wt-pct Aluminum Trace 1943
    Iron Fe2O3 2.3999 wt-pct Iron Trace 1943

Comments on the reserve resource information

  • MATRIX TONNAGE AND GRADE FIGURES WERE DERIVED IN HOUSE IN 1975 IN CONJUNCTION WITH WAR MINERALS REPORT 20.

Workings at the site

  • Type of workings Surface
    Area 342HA
    Field Value
    MAS Development Schedule # 1
    Mining Record # 1
    Status of Mining Method PROPOSED
    Mining Method OPEN PIT
    Swell Factor .7
    Percent Waste Rock 0
    Avg. Overburden Thickness 3.6
    Primary Material Cover SAND, SILT
    Percentage 100
    Hardness of Ore SAND, SILT
    Avg. Bench Height (meters) 10
    Max. Pit Slope (degrees) 45
    Capacity 5957
    Capacity Units MT ORE/DAY
    Preprod. Stripping Vol. 865
    Unit Production Cost 2.27
    Units of Production $/MT ORE
    Operating Days per Year 250
    Operating Shifts per Day 2
    Year of Information 1979

Reference information

Bibliographic references

  • Deposit

    ALLEN, VICTOR T. THE IONE FORMATION OF CALIFORNIA. UNIV OF

  • Deposit

    CALIFORNIA, V. 18, NO. 14, 1929, PP. 347-448.

  • Deposit

    CALIFORNIA DIVISION OF MINES. ALUMINUM. MINER. INF. SERVICE,

  • Deposit

    V. 10, NO. 7, JULY 1957, PP 1-6.

  • Deposit

    -----. THE CALIFORNIA MINERAL INDUSTRY IN 1960. MINER. INF.

  • Deposit

    SERVICE. V. 14, NO. 3, MARCH 1961, P. 6.

  • Deposit

    CARLSON, D.W., AND W.B. CLARK, MINES AND MINERAL RESOURCES

  • Deposit

    OF AMADOR COUNTY CALIFORNIA. CALIF. JOUR. OF MINES AND

  • Deposit

    GEOL. V. 50, NO. 1, JAN. 1954, PP. 215-225.

  • Deposit

    CLEVELAND, GEORGE B. CLAY. CH. IN MINERAL COMMODITIES OF CAL

  • Deposit

    CALIF. DIV. MINES, BULL. 176, 1957, PP. 131-152.

  • Deposit

    DIETRICH, W.F. THE CLAY RESOURCES AND THE CERAMIC INDUSTRY

  • Deposit

    OF CALIF. CALIF. DIV. MINES, BULL. 99, 1928, PP. 161-182.

  • Deposit

    PASK, J.A., AND M.D. TURNER. GEOLOGY AND CERAMIC PROPERTIES

  • Deposit

    OF THE IONE FORMATION, BUENA VISTA AREA, AMADOR COUNTY,

  • Deposit

    CALIF. CALIF. DIV. OF MINES, SPEC. REPT. 19, 1952, 39 PP.

  • Deposit

    TURNER, M.D. CLAYS. CH. IN MINERAL COMMODITIES OF CALIF.

  • Deposit

    CALIF. DIV. MINES, BULL. 156, 1950, PP. 142-150.

  • Deposit

    U.S. BUMINES. POTENTIAL SOURCES OF ALUMINUM. U.S. BUMINES,

  • Deposit

    I.C. 8335, 1967, PP. 40-43.

General comments

Subject category Comment text
Deposit FIRE CLAYS AND CLAY PRODUCTS ARE BEING PRODUCED FROM SE PITS IN THE AREA, FOR THE NORTHWESTERN U.S. PULP INDUSTRY. MATRIX GRADES AND TONNAGES ARE BASED ON WET TONNES. TH ALUMINUM GRADE SPECIFIED REPRESENTS TOTAL ALUMINUM CONTENT R THAN AVAILABLE ALUMINUM CONTENT. THE DRY ANALYSIS IS; 30% A 2.4% FE2O3, AND 51% SIO2. INITIAL DATA WAS ENTERED BY HUSTEAD OF GEORGIA TECH., A REVISED BY MCMAHAN IN 1975. THERE ARE THREE SETS OF COSTS; ORIGINAL 1975 COSTS; COSTS UPDATED FROM 1975 TO 1979; AND COMPLETELY RECOSTED 1979 COSTS.

Reporter information

Type Date Name Affiliation Comment
Reporter 27-FEB-84 Lindsey, David S. U.S. Bureau of Mines

Beyond USGS

Supplemental information added by qvyshift.com. Not part of the original USGS MRDS record.

Authoritative California resources

These are landing pages for further research — the state agencies don't currently expose per-mine deep links.